Front Seat Cushion Side Cover

FRONT SEAT CUSHION SIDE COVER

REMOVAL

Fig. 37:

1. Remove screws and plastic push pin attaching seat cushion side cover to bucket seat (Fig. 37).
2. Disengage J-strap along rear of seat cushion to access screw.
3. Remove screw attaching rear of side cover to seat cushion frame.
4. Remove side cover from seat cushion.

Fig. 38:

5. If equipped, disconnect wire connector from power seat switch (Fig. 38).

INSTALLATION

1. Place side cover in position on seat cushion.
2. If equipped, connect wire connector into power seat switch (Fig. 38).
3. Install screw attaching rear of side cover to seat cushion frame. Tighten screw to 1 N.m (9 in.lbs.) torque.
4. Engage J-strap along rear of seat cushion to access screw.
5. Install screws attaching seat cushion side cover to bucket seat (Fig. 37).