Quad Bucket Seat Side Shield / Cup Holder
QUAD BUCKET SEAT SIDE SHIELD / CUP HOLDERREMOVAL
1. Remove the seat from the vehicle.
Fig. 81:
2. Remove the two screws and remove the hinge cover (Fig. 81)
3. Remove the dump latch handle.
Fig. 82:
4. Remove the three screws (Fig. 82).
Fig. 83:
5. Depress the tab on the cup holder assembly (Fig. 83).
Fig. 84:
6. Using a deep well socket or equivalent, depress the push pin tabs and remove the cup holder assembly (Fig. 84).
INSTALLATION
1. Install cup holder onto the pin and lock tab.
2. Install the three screws.
3. Install the dump latch handle.
4. Install the hinge cover and screws.
5. Install the seat.