Air Cleaner Housing: Service and Repair
REMOVAL1. Disconnect the negative battery cable.
2. Disconnect the inlet air temperature sensor (Fig. 14).
3. Remove the inlet hose to throttle body.
4. remove the bolt for air box at upper radiator cross member.
5. Pull air box up and off over the single locating pin.
6. Remove air box from vehicle.
INSTALLATION
1. Install air box into vehicle and onto the locating pin.
2. Install bolt to hold air box to the upper radiator cross member.
3. Install the inlet hose to the throttle body.
4. Connect the inlet air temperature sensor (Fig. 14)
5. Connect the negative battery cable.