Battery Temperature Sensor: Service and Repair

Fig. 1 Battery Temperature Sensor Location:

REMOVAL
The battery temperature sensor is located under the vehicle battery and is attached (snapped into) a mounting hole on battery tray (Fig. 1).
1. Remove battery Refer to Battery for procedures.
2. Pry sensor straight up from battery tray mounting hole to gain access to electrical connector (Fig. 1).
3. Disconnect sensor from engine wire harness electrical connector.

INSTALLATION
The battery temperature sensor is located under the vehicle battery and is attached (snapped into) a mounting hole on battery tray.
1. Pull electrical connector up through mounting hole in top of battery tray.
2. Connect sensor.
3. Snap sensor into battery tray.
4. Install battery Refer to Battery for procedures.