Steering Linkage

LINKAGE

DESCRIPTION
The steering linkage is comprised of:
- Idler Arm
- Pitman Arm
- Center Link
- Drag Link
- Tie Rods

CAUTION: If any steering components are replaced or serviced an alignment must be performed, to ensure the vehicle meets all alignment specifications.

CAUTION: Components attached with a nut and cotter pin must be torqued to specification. Then if the slot in the nut does not line up with the cotter pin hole, tighten nut until it is aligned. Never loosen the nut to align the cotter pin hole.

NOTE: Periodic lubrication of the steering system components may be required.