Procedures

AUTOMATIC DAY/NIGHT MIRROR

REMOVAL
1. Disconnect and isolate the battery negative cable.

Fig. 2 Automatic Day/Night Mirror Remove:

2. Unplug the wire harness connector from the automatic day/night mirror.
3. Remove the set screw that secures the automatic day/night mirror to the windshield support button.
4. Push the automatic day/night mirror upwards far enough for the mounting bracket to clear the support button and remove the mirror from the windshield.

INSTALLATION
1. Install the mirror to the support button.
2. Tighten the set screw.
3. Reconnect the harness connector to the mirror.
4. Reconnect the negative battery cable.