Parking Lamp: Service and Repair

Park/Turn Signal Lamp Unit Replacement
REMOVAL
1. Disconnect and isolate the battery negative cable.
2. Remove screw attaching the park lamp to headlamp module.
3. Grasp lamp and pull forward to disengage clip attaching park/turn lamp to headlamp module.
4. Separate park lamp headlamp module.
5. Rotate park/turn signal socket 1/4 turn counter-clockwise and remove from back of lamp.
6. Remove side marker socket from back of lamp.
7. Separate park/turn signal lamp from vehicle.

INSTALLATION
1. Install side marker socket from back of lamp.
2. Install park/turn signal socket in back of lamp.
3. Install park/turn signal lamp in vehicle.
4. Install screw attaching the park lamp to headlamp module.
5. Connect the battery negative cable.