Seat Track: Service and Repair

REMOVAL
1. Disconnect and isolate the battery negative cable.
2. Remove the seat, power seat track from the vehicle as a unit.
3. Unplug the power seat wire harness connectors at each of the three power seat motors.
4. Release the power seat wire harness retainers from the seat track.
5. Remove the fasteners that secure the center seat cushion section to the brackets on the power seat track.
6. Remove the screws that secure the power seat track assembly to the seat cushion frame.
7. Remove the power seat track assembly from the seat cushion frame.

INSTALLATION
1. Position the power seat track assembly on the seat cushion frame.
2. Install the fasteners that secure the center seat cushion section to the brackets on the power seat adjuster.
3. Install the screws that secure the power seat track assembly to the seat cushion frame.
4. Connect the power seat wire harness connectors at each of the three power seat motors.
5. Install the power seat wire harness retainers on the seat track assembly.
6. Install the seat, power seat track as a unit.
7. Connect the battery negative cable.