Child Tether Anchor

Fig.7 Child Tether Anchor:

CHILD TETHER ANCHOR
All standard cab models are equipped with two, fixed-position, child seat tether anchors. These two anchors are integral to the upper cab back panel reinforcement and are concealed behind individual trim cover and bezel units that are integral to the cab back trim panel. The child seat tether anchors cannot be adjusted or repaired and, if faulty or damaged, they must be replaced as a unit with the upper cab back panel reinforcement. The child tether anchor trim covers and bezels are serviced as a unit with the cab back trim panel.


Club and quad cab models are equipped with three, fixed-position, child tether anchor straps that are secured to the upper cab back panel reinforcement with screws. These anchor straps are concealed behind the upright rear seat back. The child tether anchor straps are available for individual service replacement.

See the owner's manual in the vehicle glove box for more information on the proper use of the factory-installed child seat tether anchors (standard cab) and anchor straps (club/quad cab).