Transfer Case Shift Boot: Service and Repair

4WD FLOOR SHIFT BOOT

REMOVAL

Fig. 2:

1. Using a small pry bar or equivalent, remove the insert, the nut and remove the shifter knob. (Fig. 2)

Fig. 1:

2. Using a trim stick C-4755 or equivalent, pry up the boot from the console. (Fig. 1)

INSTALLATION

1. Position the shift boot over the shifter lever fully seat onto the console.
2. Install the shifter knob and nut and tighten to 27 N.m (20 ft.lbs).
3. Position the insert and seat into the knob fully.