Door Switch: Service and Repair

REMOVAL
1. Disconnect and isolate the battery negative cable.
2. Grasp the body of the door ajar switch with a pair of pliers and move the switch gently back-and-forth while pulling it out of the door hinge pillar mounting hole.

Fig. 3 Door Ajar Switch Remove/Install:

3. Pull the door ajar switch out from the pillar far enough to access the wire harness connector (Fig. 3).
4. Unplug the door ajar switch from the wire harness connector.

INSTALLATION
1. Install the door ajar switch to the wire harness connector
2. Push the door ajar switch into the pillar.
3. Connect the battery negative cable.