Clearance Lamp: Service and Repair

REMOVAL
1. Disconnect and isolate the battery negative cable

Fig. 5 Roof Clearance Lamps:

2. Remove screws holding clearance lamp lens to roof panel.
3. Rotate socket 1/4 turn counterclockwise and separate socket from lamp.

INSTALLATION
1. Install socket in lamp and rotate socket 1/4 turn clockwise.
2. Position clearance lamp on roof.
3. Install screws holding clearance lamp lens to roof panel. Tighten to 1 Nm (13 in. lbs.).
4. Connect the battery negative cable.