A-Pillar Trim

A-PILLAR TRIM

REMOVAL

1 Remove A-pillar grab handle, if equipped.






2 Grasp A-pillar trim at top and pull outward/downward to disengage upper spring clip.
3 Carefully pull bottom of A-pillar trim outward to disengage lower spring clip.
4 Disengage speaker harness connector, if equipped.
5 Separate A-pillar trim from vehicle.

INSTALLATION

1 Position A-pillar trim in vehicle.
2 Engage speaker harness connector, if equipped.
3 Align spring clips and press into place.
4 Install A-pillar grab handle, if equipped.

A-PILLAR GRAB HANDLE

REMOVAL

1 Using a small flat blade screw driver, pry trim plugs from A-pillar grab handle.






2 Remove screws attaching grab handle to A-pillar.
3 Separate A-pillar grab handle from vehicle.

INSTALLATION

1 Position grab handle on A-pillar.
2 Install screws attaching grab handle to A-pillar.
3 Install trim plugs in A-pillar grab handle.