Disassembly

47RE - AUTOMATIC TRANSMISSION
PLANETARY GEARTRAIN / DISASSEMBLY






1. Remove planetary snap-ring from intermediate shaft (Fig. 194). Discard snap-ring as it is not reusable.





2. Remove front planetary gear and front annulus gear as assembly (Fig. 195).





3. Remove front planetary gear and thrust washer from front annulus gear (Fig. 196). Note thrust washer position for assembly reference.





4. Remove tabbed thrust washer from driving shell (Fig. 197). Note washer position for assembly reference.





5. Remove sun gear and driving shell as assembly (Fig. 198).





6. Remove tabbed thrust washer from rear planetary gear (Fig. 199). Note washer position on gear for assembly reference.





7. Remove rear planetary gear and rear annulus gear from intermediate shaft (Fig. 200).





8. Remove thrust plate from rear annulus gear (Fig. 201).