Recirculation Air Door Replacement

Recirculation Door Replacement
REMOVAL
1. Remove the HVAC housing from the vehicle.
2. Unsnap the recirculation door vacuum actuator link clip and disengage the link from the recirculation door lever.
3. Using a trim stick or another suitable wide flat-bladed tool, gently pry the retainer off of the recirculation door pivot shaft.
4. Remove the recirculation door through the outside air intake opening on the top of the HVAC housing.

INSTALLATION
1. Install the recirculation door through the outside air intake opening on the top of the HVAC housing.
2. Install the retainer on the recirculation door pivot shaft.
3. Engage the recirculation door vacuum actuator link clip with the recirculation door lever.
4. Install the HVAC housing in the vehicle.