Fog/Driving Lamp: Service and Repair
Fog Lamp Unit ReplacementREMOVAL
SLT
The fog lamps are serviced from the rearward side of the front bumper.
1. Disconnect and isolate the battery negative cable.
2. Disengage fog lamp harness connector.
Fig. 10 Fog Lamp - SLT:
3. Remove fog lamp to bumper attaching nuts.
4. Separate fog lamp from bumper.
Sport
The fog lamps are serviced from the rearward side of the front fascia.
1. Disconnect and isolate the battery negative cable.
2. Disengage fog lamp harness connector.
Fig. 11 Fog Lamp - SPORT:
3. Remove fog lamp to fascia attaching nuts (Fig.11).
4. Separate fog lamp from fascia.
INSTALLATION
SLT
1. Position fog lamp in bumper.
2. Install fog lamp to bumper attaching nuts.
3. Connect fog lamp harness connector.
4. Connect the battery negative cable.
5. Check for proper operation and beam alignment.
Sport
1. Position fog lamp in fascia.
2. Install screws attaching fog lamp to fascia.
3. Connect wire connector to fog lamp.
4. Connect the battery negative cable.
5. Check for proper operation and beam alignment.