Operation CHARM: Car repair manuals for everyone.
Home >> Dodge and Ram >> 2002 >> RAM 3500 Truck 4WD V8-5.9L VIN 5 HDC >> Repair and Diagnosis >> Transmission and Drivetrain >> Drive Axles, Bearings and Joints >> Axle Shaft Assembly >> Axle Shaft >> Service and Repair >> Rear Axle - 286RBI

Rear Axle - 286RBI

Rear Axle - 286RBI / AXLE SHAFTS
REMOVAL
1. Remove the axle shaft flange bolts.
2. Slide the axle shaft out from the axle tube.

INSTALLATION
1. Clean the gasket contact surface area on the flange with an appropriate solvent. Install a new flange gasket and slide the axle shaft into the tube.
2. Install the bolts and tighten to 129 Nm (95 ft. lbs.).
pro multis · About Operation CHARM