Turn Signal Lamp: Service and Repair

REMOVAL
1. Disconnect and isolate the battery negative cable.

Sidemarker and Turn Signal Lamp:

2. Remove screws attaching sidemarker and turn signal lamp to fender.

Fig. 23 Sidemarker And Turn Signal Lamp:

3. Pull lamp outward to disengage pin from fender.
4. Separate lamp from fender.
5. Remove bulb and separate lamp from vehicle.

INSTALLATION
1. Install bulb and position lamp on vehicle.
2. Insert sidemarker and turn signal lamp alignment pin in fender.
3. Install screws attaching sidemarker and turn signal lamp to fender.
4. Connect the battery negative cable.