Air Cleaner Housing: Service and Repair

REMOVAL
1. From engine compartment, remove plastic air intake tube at front of air cleaner housing. Tube snaps onto air cleaner housing.
2. Remove engine cover.
3. Disconnect rubber hose at housing.





4. Remove wing nut and remove air cleaner assembly from throttle body (Fig. 6).

INSTALLATION
1. Position air cleaner housing to throttle body
2. If housing-to-throttle body mounting stud (Fig. 6) is being installed, tighten to 10 Nm (90 in. lbs.) torque.
3. Tighten wingnut to 1.5 Nm (15 in. lbs.) torque.
4. Connect rubber hose at housing.
5. Install plastic air intake tube to housing.
6. Install engine cover.