Front Door Window Motor: Service and Repair

REMOVAL
1. Disconnect and isolate the battery negative cable.
2. Remove the trim panel from the inside of the front door.

Power Window Motor Remove/Install:

3. Disengage the power window motor wire harness connector retainer from the mounting hole on the front door module and unplug the connector.
4. Remove the three screws that secure the power window motor and mechanism to the front door module.
5. Remove the power window motor and mechanism from the front door module.

INSTALLATION
1. Install the power window motor to the front door module.
2. Install the mounting screws to the front door module. Tighten the screws to 11 Nm (98 in. lbs.).
3. Connect the wire connector to the window motor.
4. Install the door trim panel.
5. Connect the battery negative cable.