Programming and Relearning
ENABLING/DISABLING THE ROLLING LOCK FUNCTIONTurning the rolling lock function ON and OFF
The Rolling lock function can be turned on and off by the following operations:
1. Set the vehicle to the following condition:
- Insert key into ignition key cylinder and set the ignition switch to "LOCK" (OFF) position.
- Set all the door closed.
2. Set and keep center door lock switch to the side "LOCK" for about 10 seconds to switch the rolling lock function ON/OFF. At this time, ETACS-ECU makes buzzer sound. (If switched ON, buzzer sounds once. If switched OFF, buzzer sounds twice.)