P0340

Test 1:

Test 2 - 5:

Test 6 - 10:

Test 11 - 15:

SYMPTOM
P0340 - NO CAM SIGNAL AT PCM

WHEN MONITORED
Engine cranking/running. Battery voltage greater than 10.4 volts.

SET CONDITION
At least 5 seconds or 2.5 engine revolutions have elapsed with crankshaft position sensor signals present but no camshaft position sensor signal.

POSSIBLE CAUSES
- Intermittent crankshaft position sensor signal
- Intermittent camshaft position sensor signal
- Intermittent condition
- (F888) 8-Volt supply circuit shorted to ground
- (F888) 8-Volt supply circuit open
- (F888) 8-Volt supply circuit shorted to voltage
- (K44) CMP sensor signal circuit shorted to ground
- (K44) CMP sensor signal circuit open
- (K44) CMP sensor signal circuit shorted to voltage
- (K44) CMP sensor signal shorted to (F888) 8-Volt supply circuit
- (K900) sensor ground circuit open
- PCM
- Camshaft position sensor