Headlamp Motor: Service and Repair

HEADLAMP LEVELING MOTOR - EXPORT

REMOVAL
1. Disconnect and isolate the battery negative cable.
2. Remove headlamp unit.
3. Disconnect electrical connector from headlamp leveling motor.
4. Remove the two mounting screws.

Fig.14 Headlamp Leveling Motor - Export:

5. Gently pry motor from headlamp unit.

INSTALLATION
1. Press motor into position.
2. Install the two mounting screws.
3. Connect the electrical connector to motor.
4. Install the headlamp unit.
5. Connect the battery negative cable.