Tail Lamp - Export Replacement

REMOVAL
1. Disconnect and isolate the battery negative cable.
2. Remove the tail lamp unit (Refer to ELECTRICAL/LAMPS/LIGHTING - EXTERIOR/TAIL LAMP UNIT - REMOVAL).

Fig.29 Tail Lamp Bulbs:

3. Squeeze the tabs on housing retaining the bulbs and remove from the tail lamp unit (Fig. 29).
4. Remove bulbs by depressing, then turning counter-clockwise.

INSTALLATION
1. Install bulbs by turning clockwise.
2. Install housing to tail lamp unit.
3. Install the tail lamp unit (Refer to ELECTRICAL/LAMPS/LIGHTING - EXTERIOR/TAIL LAMP UNIT - INSTALLATION).
4. Connect the battery negative cable.