Rear

REMOVAL
1. Remove the rear trim cover. Refer to: "Body and Frame, Interior Trim : Trim Panel" Service and Repair
2. Remove the three blend door actuator screws.
3. Remove the blend door actuator and place aside.
4. Remove the two screws from the heater/evaporator tubes plastic retainer.
5. Remove the heater core from the case.

INSTALLATION
1. Install the heater core into the heater-A/C housing.
2. Install the two screws to the heater/evaporator tubes plastic retainer.
3. Install the blend door actuator.
4. Install the three blend door actuator screws.
5. Install the rear trim cover. Refer to: "Body and Frame, Interior Trim : Trim Panel" Service and Repair