Center High Mounted Stop Lamp Unit (CHMSL) Replacement

REMOVAL
1. Disconnect and isolate the battery negative cable.
2. Remove the liftgate trim panel.

Fig.3 Center High Mounted Stop Lamp:

3. Remove the CHMSL lamp mounting screws.
4. Remove the CHMSL lamp.
5. Turn the bulb sockets 1/4 turn counterclockwise.
6. Separate the socket from lamp.

INSTALLATION
1. Position the socket in the lamp.
2. Turn the bulb sockets 1/4 turn clockwise.
3. Position the CHMSL lamp in place and install the mounting screws.
4. Install the liftgate trim panel.
5. Connect battery negative cable.