Front Brake Rotor

REMOVAL - FRONT
1. Raise and support the vehicle.
2. Remove the wheel and tire assembly.





3. Remove the caliper from the steering knuckle and remove caliper adapter assembly.

NOTE: Do not allow brake hose to support caliper adapter assembly.









NOTE: Remove Hub Extension if equipped.

Fig. 1:

4. Remove the rotor from the hub/bearing wheel studs.

INSTALLATION - FRONT
1. On models with all-wheel Antilock System (ABS), check condition of tone wheel on hub/bearing. If teeth on wheel are damaged, hub/bearing assembly will have to be replaced (tone wheel is not serviced separately).
2. Install the rotor onto the hub/bearing wheel studs.
3. Install the caliper adapter assembly and tighten adapter bolts to:
4. Install the wheel and tire assembly and lower the vehicle.
5. Apply the brakes several times to seat brake pads. Be sure to obtain firm pedal before moving vehicle.