Wiper on/Off Relay Replacement

WIPER ON/OFF RELAY

REMOVAL
1. Disconnect and isolate the battery negative cable.

Fig.29 Integrated Power Module:

2. Remove the cover from the Integrated Power Module (IPM).
3. Remove the wiper on/off relay by grasping it firmly and pulling it straight out from the receptacle in the IPM.

INSTALLATION
1. Position the wiper on/off relay to the proper receptacle in the Integrated Power Module (IPM).
2. Align the wiper on/off relay terminals with the terminal cavities in the IPM receptacle.
3. Push firmly and evenly on the top of the wiper on/off relay until the terminals are fully seated in the terminal cavities in the IPM receptacle.
4. Reinstall the cover onto the IPM.
5. Reconnect the battery negative cable.