P0340

Test 1:

Test 2 - 5:

Test 6 - 9:

Test 10 - 14:

Test 15 - 16:

SYMPTOM
P0340-CAMSHAFT POSITION SENSOR CIRCUIT

WHEN MONITORED
Engine cranking/running. Battery voltage greater than 10 volts.

SET CONDITION
At least 5 seconds or 2.5 engine revolutions have elapsed with crankshaft position sensor signals present but no camshaft position sensor signal. One Trip Fault.

POSSIBLE CAUSES
- Intermittent Crankshaft Position Sensor Signal
- Intermittent Camshaft Position Sensor Signal
- (K7) 5 volt Supply Circuit Shorted To Ground
- (K7) 5 volt Supply Circuit Open
- (K7) 5 volt Supply Circuit Shorted To Voltage
- (K44) CMP Signal Circuit Shorted Ground
- (K44) CMP Signal Circuit Open
- (K44) CMP Signal Circuit Shorted To Voltage
- (K44) CMP Signal Shorted To (K7) 5 volt Supply Circuit
- (K4) Sensor Ground Circuit Open
- PCM - (K7) 5 volt Supply
- PCM - (K44) CMP Signal
- Camshaft Position Sensor