Removal

REMOVAL - CHARGE AIR COOLER HOSES

HOSE - CHARGE AIR COOLER TO THROTTLE BODY
1. Raise vehicle on hoist.





2. Disconnect Inlet Air Temperature (IAT) sensor connector (Fig. 19).
3. Disconnect Throttle Inlet Pressure (TIP) hose from charge air cooler hose (Fig. 19).





4. Loosen hose clamp at charge air cooler (Fig. 20).
5. Dislodge hose from charge air cooler.
6. Loosen hose clamp at throttle body.

HOSE - TURBOCHARGER TO CHARGE AIR COOLER
1. Raise vehicle on hoist.
2. Loosen hose clamp at turbocharger (Fig. 20).
3. Dislodge hose from turbocharger.
4. Loosen hose clamp at charge air cooler (Fig. 20).
5. Dislodge hose from charge air cooler.





6. Remove nuts securing charge air cooler hose to structural collar (Fig. 21).
7. Remove charge air cooler hose.