Recric Door Travel Too Large (Stored) - ATC

Test 1:

Test 2:

SYMPTOM
RECIRC DOOR TRAVEL TOO LARGE (STORED)

TEST NOTE
This symptom is diagnosed using the test AC PRESSURE TOO HIGH (STORED).

WHEN MONITORED
Ignition in RUN and IOD fuse installed.

SET CONDITION
This DTC is set when the ATC monitors the travel range during system initialization and the measured range is greater than expected.

POSSIBLE CAUSES
- Check for active ATC DTCs
- AC cooldown test fault message(s) present
- Stored codes test complete