Right Mirror Vertical Sensor Out of Range High

Test 1 - 2:

Test 3 - 7:

SYMPTOM
RIGHT MIRROR VERTICAL SENSOR OUT OF RANGE HIGH

WHEN MONITORED
Continuously when the PCI bus is active.

SET CONDITION
This code is set when the mirror sensor feedback to the Memory Seat Mirror Module is greater than the mirror out of range high value stored in EEPROM. Code will remain for 50 ignition cycles.

POSSIBLE CAUSES
- Right mirror sensor ground wire open
- Right mirror vertical position wire shorted to voltage
- Stored diagnostic trouble code
- Right mirror vertical position signal open
- Right power mirror
- Memory seat mirror module sensor ground
- Memory seat mirror module vertical position signal