Right Cylinder Lock Switch Input Stuck - BCM

Test 1 - 2:

Test 3 - 5:

SYMPTOM
RIGHT CYLINDER LOCK SWITCH INPUT STUCK - BCM (EXPORT ONLY - IF EQUIPPED)

WHEN MONITORED
At all times when battery power is supplied to the Body Control Module.

SET CONDITION
When the BCM senses voltage to the cylinder lock switch between 1.3 and 3.25 for over 10 seconds.

POSSIBLE CAUSES
- DTC present
- Body control module - right cylinder lock switch voltage incorrect
- Right cylinder lock switch ground open
- Right cylinder lock switch mux open
- Cylinder lock switch stuck