Incomplete Power Close - Full Open Switch Failure

Test 1 - 2:

Test 3 - 4:

SYMPTOM
INCOMPLETE POWER CLOSE - FULL OPEN SWITCH FAILURE/NON ENGAGEMENT

WHEN MONITORED
Whenever the power liftgate is closing.

SET CONDITION
The Full Open Switch was detected as closed before 200 hall effect pulses were counted since the start of the close operation. May be triggered by an intermittent full open switch failure, or non gear engagement

POSSIBLE CAUSES
- DTC present
- Obstruction or sticking full open switch
- Full open switch short to ground
- Power liftgate motor assembly - full open switch