Passenger Seat Switch

1. Remove the power seat switch, refer to the Switch Removal and Installation procedures.
2. Using an ohmmeter, check pin #1 of the power seat switch connector for continuity to ground. It should be present, If OK go to Step 3 , If NOT OK repair the open ground circuit as required.
3. Using a voltmeter, check pin #5 of the power seat switch connector for battery voltage. If OK, goto Step 4. If not OK, repair the open voltage supply circuit as required.

Passenger Seat Switch Continuity Test Table:

Seat Switch Pin Call - Out:

4. Using an ohmmeter, perform the Seat Switch Continuity Test table. If there is no continuity at any of the switch positions, replace the power seat switch.