Natural Vacuum Leak Detection Assembly
REMOVAL1. Disconnect thew negative battery cable.
Fig. 4 NVLD Location:
2. Raise vehicle and support.
3. Unlock and disconnect the electrical connector.
4. Remove the hoses from the NVLD valve.
5. Remove the 2 fasteners.
Fig. 5 NVLD Removal/Installation:
6. Remove the valve and bracket from vehicle.
Fig. 6 NVLD Value And Bracket:
7. Remove valve from bracket.
INSTALLATION
1. Install NVLD valve to the bracket.
2. Install valve and bracket to the vehicle.
3. Install the 2 mounting bolts and tighten.
4. Install the electrical connector and lock.
5. Install the 2 hoses and lock the clamps.
6. Lower vehicle.