Fuel Pressure Regulator: Service and Repair

Fuel Pressure Regulator O-rings:

REMOVAL

The fuel pressure regulator is part of the fuel pump module.Remove the fuel pump module from the fuel tank to access the fuel pressure regulator. Refer to the Fuel Pump Module removal in this section.

1. Squeeze tangs on pressure regulator retainer and pull to remove retainer.
2. Pry fuel pressure regulator out of housing.
3. Ensure both upper and lower 0-rings were removed with regulator.


INSTALLATION

The fuel pressure regulator is part of the fuel pump module. Remove the fuel pump module from the fuel tank to access the fuel pressure regulator. Refer to the Fuel Pump Module removal in this section.

1. Lightly lubricate the O-rings with clean engine oil and place them into opening in pump module
2. Push regulator into opening in pump module.
3. Retaining tabs snap into housing.