Clutch Pedal Upstop Switch (RHD)

CLUTCH PEDAL UPSTOP SWITCH - RHD

REMOVAL
1. Disconnect battery negative cable.

Fig. 29:

2. Remove instrument panel lower silencer (Fig. 29).

Fig. 30:

3. Remove knee bolster (Fig. 30).

Fig. 32:

4. Disconnect upstop switch connector (Fig. 32).
5. Remove upstop switch/bracket-to-clutch pedal bracket nut. Remove switch (Fig. 32).

INSTALLATION
1. Install switch and bracket assembly. Torque nut to 12 Nm (110 in. lbs.) (Fig. 32).
2. Connect upstop switch assembly (Fig. 32).
3. Install knee bolster (Fig. 30).
4. Install instrument panel lower silencer (Fig. 29).
5. Connect battery negative cable.