Installation

Differential - Rear Driveline Module
INSTALLATION
1. Install rear driveline module assembly to transmission jack and secure.





2. Raise rear driveline module into position and install and torque mounting bolts (Fig. 26) to 54 Nm (40 ft. lbs.).
3. Remove transmission jack.
4. Install and torque torque arm mount-to-body bolts to 54 Nm (40 ft. lbs.).






5. Install halfshafts to differential output flanges and torque bolts (Fig. 27) to 61 Nm (45 ft. lbs.).
6. Install propeller shaft.
7. Lower vehicle.