Gearshift Mechanism

GEARSHIFT MECHANISM
REMOVAL
1. Disconnect battery negative cable.





2. Remove gearshift knob, by pushing down and rotating 1/4 turn clock-wise (Fig. 185).





3. Remove gearshift boot from center console by disengaging at three (3) retaining clips (Fig. 186).
4. Apply park brake to allow park brake handle to clear center console upon removal.





5. Remove two (2) cup holder bottom plugs (Fig. 187).





6. Remove four (4) center console-to-gearshift mechanism screws. Remove console assembly (Fig. 188).





7. Remove center console support bracket (Fig. 189).





8. Remove crossover cable retainer clip (Fig. 190).





9. Remove crossover cable from gearshift mechanism (Fig. 191).





10. Remove selector cable retainer clip (Fig. 192).





11. Remove selector cable from gearshift mechanism (Fig. 193).





12. Remove four (4) gearshift mechanism-to-park brake bracket nuts. Remove gearshift mechanism from bracket (Fig. 194).

INSTALLATION





1. Install gearshift mechanism to park brake bracket (Fig. 195). Install and torque nuts to 12 Nm (108 inch lbs.).








2. Install selector cable to gearshift mechanism (Fig. 196). Install retainer clip (Fig. 197).








3. Install crossover cable to gearshift mechanism (Fig. 198). Install retainer clip (Fig. 199).
4. Adjust crossover cable.





5. Install center console support bracket (Fig. 200). Torque support bracket-to-gearshift mechanism screws to 12 Nm (108 inch lbs.).





6. Install center console assembly (Fig. 201). Install and torque center console-to-gearshift mechanism screws to 5 Nm (45 inch lbs.).





7. Install cup holder plugs (Fig. 202).





8. Install gearshift boot to console (Fig. 203). Secure with three (3) retainer clips.





9. Install gearshift knob to gearshift lever (Fig. 204). Orient shift pattern 1/4-turn clockwise, push down and rotate 1/4-turn counter-clockwise and release. Secure boot to knob.
10. Connect battery negative cable.