Procedures

POWER SEAT RECLINER

REMOVAL




1. Remove the seat back (1).
2. Disengage J-strap at base of seat cushion (4).
3. Roll seat cushion cover upward to access bolts attaching recliner (3) to seat back frame (1).
4. Remove bolts attaching recliner to seat back frame (1).
5. Separate recliner (3) from seat (4).

INSTALLATION




1. Position recliner (3) assembly on seat frame (4).
2. Install bolts attaching recliner (3) to seat back frame (1) and tighten to 28 Nm (20 ft. lbs.).
3. Roll seat cover downward.
4. Engage J-strap at base of seat cushion (4).
5. Install the seat back (1)