D. Install Instrument Cluster

1. Install the four screws that secure the instrument cluster to the instrument panel structural support (Figure 2). Tighten the screws to 17 in. lbs. (2 N.m).





2. Position the instrument cluster bezel close enough to the instrument panel to connect the cluster bezel electrical connectors (Figure 8).

3. Position the instrument cluster bezel onto the instrument panel and seat fully.

4. Install the two instrument cluster bezel retaining screws and tighten securely (Figure 1).

5. Install the center stack bezel.

6. Install the instrument panel end cap.

7. Raise the steering column into position and install the mounting nuts. Tighten the nuts to 20 ft. lbs. (28 N.m).

8. Install the brake lamp switch into the brake lamp bracket

9. Install the instrument panel knee blocker reinforcement.

10. Install the knee blocker.

11. Verify brake light operation.