Sun Shade: Service and Repair

REMOVAL




1. Remove the water channel (1).
2. Cycle sunroof motor (9) to the open position.
3. Move sunshade (5) towards the closed position stopping three to four inches from the closed position.
4. Depress the spring feet clips (14) on one side of the sun shade.
5. Remove the sunshade (5).

INSTALLATION




1. Place one side of the sunshade (5) spring feet clips (14) into the top track U-frame (11).
2. Depress the both releasing clips on the other side to allow them to go into the top track U-frame (11).
3. Move sunshade (5) to the open position.
4. Verify that the sunshade (5) moves back and forth properly.
5. Cycle sunroof towards the closed position.
6. Install the water channel (1).