Driver Front Riser Up Switch Stuck

Test 1 - 2:

Test 3 - 4:

SYMPTOM
DRIVER FRONT RISER UP SWITCH STUCK

WHEN MONITORED
Continuously when the PCI bus is active.

SET CONDITION
If the seat switch is active for 30 seconds, this code will set and the MSMAPM will ignore the input until the state has changed. Three seconds after the stuck condition is removed, the seat will resume to normal operation. Code will remain for 50 ignition cycles.

POSSIBLE CAUSES
- Stored diagnostic trouble code
- Driver power seat switch
- Driver seat front up switch sense wire short to voltage
- Memory seat/mirror/adjustable pedals module