Driver Mirror Horizontal Sensor Out of Range High

Test 1 - 2:

Test 3 - 7:

SYMPTOM
DRIVER MIRROR HORIZONTAL SENSOR OUT OF RANGE HIGH

WHEN MONITORED
Continuously when the PCI bus is active

SET CONDITION
This code is set when the mirror sensor feedback to the Memory Seat/Mirror/Adjustable Pedals Module is greater than the mirror out of range high value stored in EEPROM. Code will remain for 50 ignition cycles.

POSSIBLE CAUSES
- Mirror horizontal position wire shorted to voltage
- Mirror sensor ground wire open
- Stored diagnostic trouble code
- Mirror horizontal position signal open
- Power mirror
- Memory seat/mirror/adjustable pedals module horizontal position signal
- Memory seat/mirror/adjustable pedals module sensor ground