Driver Mirror Vertical Sensor Out of Range High

Test 1 - 2:

Test 3 - 7:

SYMPTOM
DRIVER MIRROR VERTICAL SENSOR OUT OF RANGE HIGH

WHEN MONITORED
Continuously when the PCI bus is active.

SET CONDITION
This code is set when the mirror sensor feedback to the Memory Seat/Mirror/Adjustable Pedals Module is greater than the mirror out of range high value stored in EEPROM. Code will remain for 50 ignition cycles.

POSSIBLE CAUSES
- Mirror sensor ground wire open
- Mirror vertical position wire shorted to voltage
- Stored diagnostic trouble code
- Mirror vertical position signal open
- Power mirror
- Memory seat/mirror/adjustable pedals module sensor ground
- Memory seat/mirror/adjustable pedals module vertical position signal