Driver Mirror Vertical Sensor Out of Range Low

Test 1 - 2:

Test 3:

SYMPTOM
DRIVER MIRROR VERTICAL SENSOR OUT OF RANGE LOW

WHEN MONITORED
Continuously when the PCI bus is active.

SET CONDITION
This code is set when the mirror sensor feedback to the Memory Seat/Mirror/Adjustable Pedals Module is less than the mirror out of range low value stored in EEPROM. Code will remain for 50 ignition cycles

POSSIBLE CAUSES
- MSMAPM vertical position low
- Stored diagnostic trouble code
- Mirror vertical position signal wire short to ground
- Power mirror