Driver Recliner Sensor Out of Range Low

Test 1 - 2:

Test 3 - 7:

Test 8 - 9:

SYMPTOM
DRIVER RECLINER SENSOR OUT OF RANGE LOW

WHEN MONITORED
Continuously when the PCI bus is active.

SET CONDITION
This condition is immediately set when the seat motor potentiometer feeds a value lower than the Memory Seat/Mirror/Adjustable Pedals Module has stored in EEPROM. Code will remain for 50 ignition cycles.

POSSIBLE CAUSES
- Seat 5 volt supply wire short to ground
- Seat sensor 5 volt supply wire open
- Recliner position signal circuit open
- Recliner position signal circuit short to ground
- Memory seat/mirror/adjustable pedals module 5 volt supply
- Recliner sensor low
- Memory seat/mirror/adjustable pedals module recliner low
- Stored diagnostic trouble code