Incomplete Power Open - Transistor Shorted

Test 1 - 2:

Test 3 - 4:

SYMPTOM
INCOMPLETE POWER OPEN - TRANSISTOR SHORTED

WHEN MONITORED
Whenever the power sliding door is performing a power open operation.

SET CONDITION
The Power Sliding Door Module detects that the motor is rotating (monitors hall effect pulses) even though the controlled PWM rate is 0 percent. This DTC is set during the power open operation.

POSSIBLE CAUSES
- DTC present
- Sliding door module short to ground
- Sliding door open driver wire short to ground
- Sliding door close driver wire short to ground
- Power sliding door motor