Incomplete Latch Release- Over Current

Test 1 - 2:

Test 3:

SYMPTOM
INCOMPLETE LATCH RELEASE- OVER CURRENT

WHEN MONITORED
Whenever the power liftgate latch is operated.

SET CONDITION
The latch motor stall current of 6.2 amps was detected during a non-redundant release. The main causes of this code setting is some type of obstruction during the release or excessive draw on the motor. This code is set during the releasing operation.

POSSIBLE CAUSES
- DTC present
- Binding door
- Pawl or ratchet switch stuck
- Cinch release motor assembly